To Make your Carpet Look Good
If a pet's claw or other sharp object has pulled a loop of yarn up out of your Berber carpet, you can repair it with a couple of simple tools and some patience.
Berber consists of long strands of yarn woven in and out of the holes in a sheet of backing material. Repairing a snag is similar to working a loop of yarn back into a sweater.
1. Look closely at the pulled loop of carpet. Identify where the yarn is woven into the backing material and where it comes out to form the next loop. You may need to pull on the snagged loop to identify where the yarn goes next.
2. Place one knitting needle, screwdriver, or other long, thin tool through the snagged loop of carpet. This will prevent you from pulling the loop all the way through the backing.
3. Using another knitting needle, screwdriver, or other long, thin tool, pull up the next loop in the carpet so that the snagged loop is pulled back down. This may take some force. Leave the original snagged loop just slightly larger than the surrounding loops of carpet, so that the newly pulled-out loop is slightly smaller than the original snag.
4. Repeat this process, weaving the yarn through the backing, each time making the new pulled-out loop of carpet just a little smaller than the previous one. Eventually you can work the snag back into the fabric of the carpet. The amount of time and number of loops this will take depends on how big the original snag is.
5. Alternately, if the berber yarn has pulled more than just a few loops, the row(s) can be cut out and a new section of yarn can be fastened back into the area needing repair. This can be accomplished if you have some left-over berber from when the carpet was originally installed. If not, a small closet can be used for "donor" material.
6. Either way, use a new, sharp utility knife and cut out the backing of the area that needs repairing. Cut close to the good rows of yarn without cutting into them. Take your donor carpet and match the pattern to the repair area. Cut a patch to fit the repair area, test fit, remove, put blob of hot glue in area of repair, place piece back into repair. Make sure repaired section is level with surrounding berber.
7. If small snags are noted anywhere in berber, use sharp tool and gently press snag to where it is level with surrounding yarn.
Source: wikihow
About Fantastic Floors, Inc. We are a successful company with more than 25 years of experience in the market, we have the infrastructure, high quality equipment, materials and supplies to achieve and exceed the expectations of our customers, allowing us to gain the confidence and loyalty for our services .
We have more than 500 residential, 300 properties and 25 commercial customers totally satisfied with our services.
Companies for Carpet Installation.
Carpet Cleaning Vendor in Houston, Carpet Repair, Carpet Treatment, Companies for Carpet Repair, Companies for Carpet Treatment, Companies for Carpet Installation, Remove Water for Carpet, Carpet Sale and Installation, Installer of carpet, Fantastic floor Inc, Wood floor installers, Wood floor installation, Installer of wood floor, Hardwood floor remodeling, Carpet flooring, Carpet remodeling, Ceramic tile Installers, Ceramic tile installation, Installer of ceramic tile, Ceramic tile remodeling, Ceramic tile refinishing, Ceramic tile finishes, Porcelain tile Installers, Porcelain tile installation, Installer of porcelain tile, Porcelain tile flooring, Porcelain tile remodeling, Porcelain tile refinishing, Porcelain tile finishes, Laminate tile, Laminate tile installation, Installer of laminate tile, Laminate tile flooring, Laminate tile remodeling, Laminate tile finishes, Vinyl tile installers, Vinyl tile installation, Installer of vinyl tile, Vinyl tile flooring, Vinyl tile remodeling, Fantastic floor. Inc.
