Wood Floor Installers in Houston
Install the Floor
1. Lay down the first board, tongued-edge facing out into the room. The board should leave a small gap at the wall for expansion (check manufacturer’s recommendation) and be placed in line with the room (so consider measuring guidelines). Place spacers in the gap.
2. Nail the boards to the subfloor. Use the drill to make guide holes and then, using a hammer, nail the board into the subfloor with nails placed 1-3” from the end of the plank, ½” from the groove side, and every six inches down the board. Use a nail set to finish.
3. Lock your boards together. When the first row is done, place the next board so that the tongue of the first fits into the groove. You will want to place the boards so that they are offset, beginning six inches or so from the ending of the previous board. Use a mallet and tapping block to tap the boards together and create a tight seam.
4. Continue until you have completed three rows. You will nail the first three rows just as described in Step 2.
5. Remember to cut boards to size. Since you are staggering boards, you will likely need to cut boards in order to fit in the gaps at the end. Measure the distance that it needs to be, keeping the expansion gap in mind, and then (with the board face-down) cut it using a saw.
6.Begin laying rows with the flooring nailer. Once you have enough space, you should begin using the flooring nailer (though you could technically do the entire floor with the hammer and nails). Simply align it with the board to be nailed and then hit it.
7. Use a hammer for the last few rows. You will eventually run out of room to use the flooring nailer. Hammer the last few rows the same way you did the first ones.
8. Cut the final board to size. If it does not fit properly, you will need to cut the final board so that it is narrow enough to fit. Measure carefully and use a circular or miter saw to cut the boards to size.
9. Place the final boards using the crowbar. Since you will not have enough space to tap them with the mallet, use a crowbar instead to wedge them into place. You are now ready to finish your floor.
Source:wikihow
About Fantastic Floors, Inc. We are a successful company with more than 25 years of experience in the market, we have the infrastructure, high quality equipment, materials and supplies to achieve and exceed the expectations of our customers, allowing us to gain the confidence and loyalty for our services .
We have more than 500 residential, 300 properties and 25 commercial customers totally satisfied with our services.
Wood floor installers.
Carpet Cleaning Vendor in Houston, Carpet Repair, Carpet Treatment, Companies for Carpet Repair, Companies for Carpet Treatment, Companies for Carpet Installation, Remove Water for Carpet, Carpet Sale and Installation, Installer of carpet, Fantastic floor Inc, Wood floor installers, Wood floor installation, Installer of wood floor, Hardwood floor remodeling, Carpet flooring, Carpet remodeling, Ceramic tile Installers, Ceramic tile installation, Installer of ceramic tile, Ceramic tile remodeling, Ceramic tile refinishing, Ceramic tile finishes, Porcelain tile Installers, Porcelain tile installation, Installer of porcelain tile, Porcelain tile flooring, Porcelain tile remodeling, Porcelain tile refinishing, Porcelain tile finishes, Laminate tile, Laminate tile installation, Installer of laminate tile, Laminate tile flooring, Laminate tile remodeling, Laminate tile finishes, Vinyl tile installers, Vinyl tile installation, Installer of vinyl tile, Vinyl tile flooring, Vinyl tile remodeling, Fantastic floor. Inc.
Comments